2 Parameters
2.2 List of parameters
SINAMICS G130/G150
230
List Manual (LH2), 07/2016, A5E03263479A
14:
kg/h
15:
t/min
16:
t/h
17:
N
18:
kN
19:
Nm
20:
psi
21:
°F
22:
gallon/s
23:
inch³/s
24:
gallon/min
25:
inch³/min
26:
gallon/h
27:
inch³/h
28:
lb/s
29:
lb/min
30:
lb/h
31:
lbf
32:
lbf ft
Dependency:
Only the unit of the technology controller parameters are switched over (unit group 9_1).
Refer to: p0596
Note:
When switching over from % into another unit, the following sequence applies:
- set p0596
- set p0595 to the required unit
Description:
Sets the reference quantity for the technological units.
When changing over using changeover parameter p0595 to absolute units, all of the parameters involved refer to the
reference quantity.
Dependency:
Refer to: p0595
Notice:
When changing over from one technological unit into another, or when changing the reference parameter, a
changeover is not made.
Description:
Sets the sensor to monitor the motor temperature.
The sensor type used is set in p0601.
Value:
0:
No sensor
1:
Temperature sensor via encoder 1
2:
Temperature sensor via encoder 2
3:
Temperature sensor via encoder 3
10:
Temperature sensor via a BICO interconnection
11:
Temperature sensor via Motor Module / CU terminals
20:
Temperature sensor via a BICO interconnection p0608
21:
Temperature sensor via a BICO interconnection p0609
Dependency:
Refer to: r0458, p0601, p0603
p0596
Technological unit reference quantity / Tech unit ref qty
VECTOR_G
(Tech_ctrl)
Can be changed:
T
Calculated:
-
Access level:
1
Data type:
FloatingPoint32
Dyn. index:
-
Func. diagram:
-
P-Group:
-
Unit group:
-
Unit selection:
-
Not for motor type:
-
Scaling:
-
Expert list:
1
Min Max
Factory
setting
0.01 340.28235E36
1.00
p0600[0...n]
Motor temperature sensor for monitoring / Mot temp_sensor
VECTOR_G
Can be changed:
C2(3), U, T
Calculated:
CALC_MOD_ALL
Access level:
2
Data type:
Integer16
Dyn. index:
MDS, p0130
Func. diagram:
8016
P-Group:
Motor
Unit group:
-
Unit selection:
-
Not for motor type:
-
Scaling:
-
Expert list:
1
Min Max
Factory
setting
0 21
0
Summary of Contents for SINAMICS G130
