Error Code List Chapter4. Cash & Check In Module
4-82
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I3868
[Entry In/Out]Timeout of forced
inhale at the Bundle part
1. Remove the residual media in the
device.
2. Execute initialization.
I3869
[Entry In/Out]CST2 operation
timeout (Bundle->Escrow->CST2)
1. Remove the residual media in the
device.
2. Execute initialization.
I386A
[Entry In/Out]Timeout occurs while
resetting in Bundle mode (Retract)
1. Remove the residual media in the
device.
2. Execute initialization.
I386B
[Entry In/Out]Timeout occurs
during preparing for CST2 store
1. Remove the residual media in the
device.
2. Execute initialization.
I386C
[Entry In/Out]Timeout occurs while
resetting in Bundle mode (CST2)
1. Remove the residual media in the
device.
2. Execute initialization.
I386D
[Entry In/Out]CST1 store timeout
(Escrow->CST2)
1. Remove the residual media in the
device.
2. Execute initialization.
I386E
[Entry In/Out]CST2 store timeout
(Escrow->CST2)
1. Remove the residual media in the
device.
2. Execute initialization.
I386F
[Entry In/Out]Timeout of checking
residual media in Bundle occurs
during initialization.
1. Remove the residual media in the
device.
2. Execute initialization.
I3870
[Entry In/Out] Failed to rewind
while the Escrow is empty (logical
sensor is empty)
1. Remove the residual media at the
Escrow part (12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03) and
the pollution.
3. If no alien material exists, check
whether the sensor is polluted.
4. Execute CCIM initialization.
I3871
[Entry In/Out]Deposit reject
command is received when the
residual media are not detected at
the Reject part.
1. Remove the residual media in the
device.
2. Execute initialization.
I3872
[Entry In/Out]Detects residual
media at the Reject part
1. Remove the residual media in the
device.
2. Execute initialization.
I3879
[Entry In/Out]A fault occurs while
preparing for BC part.
1. Remove the residual media in the
device.
2. Check the BC Cover(3) Lock state.
3. Execute initialization.
I387A
[Entry In/Out]BC response
timeout.
1. Check the cable connecting between
Main and BC (Connector CN37).
I387B
[Entry In/Out] The number of
notes which have passed BC is
not consistent with that of Escrow
and Reject.
1. Remove the residual media in the
device.
2. Check the BC Cover(3) Lock state.
3. Execute initialization.
I387C
[Entry In/Out]BC operation is not
completed.
1. Remove the residual media in the
device.
2. Check the BC Cover(3) Lock state.
3. Execute initialization.
I38E0
[Entry In/Out]Anomaly of check
information
1. Remove the residual media in the
device.
2. Execute initialization.