Nautilus Hyosung MX8800, Manual, Page: 601 / 827

Error Code List Chapter4. Cash & Check In Module
4-48 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I2817 [Shutter]Timeout occurs in
operation. 1. Remove the residual media in the
device.
2. Execute initialization.
I2818 [Shutter]Timeout occurs in
operation. 1. Remove the residual media in the
device.
2. Execute initialization.
I2819 [Shutter]Failed to inhale the
media. 1. Remove the residual media in the
device.
2. Execute initialization.
I281B [Shutter]When executing Retract,
timeout occurs while picking up
back the media. 1. Remove the residual media in the
device.
2. Execute initialization.
I2823 [Shutter]BC Cover Open fault. 1. Remount the BC Cover(3) and
execute initialization.
2. If the fault is not recovered, reboot the
system.
I2829 [Shutter]Bundle residual fault 1. Remove the residual media at the
Bundle part (1).
2. Execute initialization.
I282A [Shutter] Error in processing the
number of papers at the Reject
part 1. Open the BM2(7) and BM2(12) and
remove the residual media at the moving
path (8, 9, 10).
2. Execute initialization.
I282B [Shutter] Error in processing the
number of papers at the Escrow
part 1. Open the BM2(12) and remove the
residual media at the moving path (8,
10, 12).
2. Execute initialization.
I282C [Shutter]Timeout occurs when
moving the media at the Reject to
the Bundle. 1. Remove the residual media at the
Bundle(1), SCM(2), and Reject part (9).
2. Execute initialization.
I282D [Shutter]Timeout occurs when
moving the media at the Reject to
the Bundle and then processing
the media. 1. Remove the residual media at the
Bundle(1), SCM(2), and Reject part (9).
2. Execute initialization.
I282E [Shutter]Timeout occurs when
checking the residual media in the
Bundle. 1. Remove the residual media at the
Bundle(1), SCM(2), and Reject part (9).
2. Execute initialization.
I282F [Shutter]Timeout occurs when
moving the media at the Escrow to
the Reject. 1. Open the BM2(7) and BM2(12) and
remove the residual media at the moving
path (8, 9, 10).
2. Execute initialization.
I2830 [Shutter]Timeout occurs in
initializing Escrow. 1. Open the BM2(7) and BM2(12) and
remove the residual media at the moving
path (8, 9, 10).
2. Execute initialization.
I2831 [Shutter]After moving the media at
the Escrow to the Reject, jam
occurs at the Escrow entry sensor
or 3-Way Gate 2 control sensor
(FDS15 or FDS12). 1. Open the BM2(12) and remove the
residual media at the moving path (8, 9,
10, 12).
2. Execute initialization.
I2832 [Shutter]BM2 moving path part is
open. 1. Check the BM2(7) Lock state.
2. Execute initialization.
I2833 [Shutter]BM3 moving path part is
open. 1. Check the BM2(7) Lock state.
2. Execute initialization.
I2834 [Shutter]CCIM is not detected on
the home position. 1. Mount the CCIM on the home
position.