Chapter1. Barcode Reader Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
1-1
Chapter1. Barcode Reader
Code
Problem Description
Troubleshooting
9708014
Fail to open Serial port.
1. Check whether the communication
cable and serial port are connected or
not.
2. Change Unit if error is continuous
9708030
Fail to create registry
1. Reset the Barcode SP
9708031
Fail to read registry information 1. Reset the Barcode SP
9708032
Fail to write registry information 1. Reset the Barcode SP
9708034
Fail to delete registry
information
1. Reset the Barcode SP
9708042
Fail to start thread of the
BarCode SP
1. Reset the Barcode SP
9708043
Fail to stop thread of the
BarCode SP
1. Reset the Barcode SP
9708101
Cannot set to enable state on
the BarCode Reader
1. Check a barcode reader
2. Check a status of the communication
line
3. Reset the BarCode SP
4. Change Unit if error is continuous
9708102
Cannot set to disable state on
the BarCode Reader
1. Check a barcode reader
2. Check a status of the communication
line
3. Reset the BarCode SP
4. Change Unit if error is continuous
9708103
Cannot read a BarCode Data
from BarCode Reader
1. Check a barcode reader and barcode
image
2. Check a status of the communication
line
3. Reset the BarCode SP
4. Change Unit if error is continuous
9708104
Detected a error on the
communication line(RS-232C)
1. Check a barcode reader
2. Check a status of the communication
line
3. Reset the BarCode SP
4. Change Unit if error is continuous
9708105
encountered unexpected
timeout from firmware.
1 .SP Close and Open(Take the Log for
failure)
2. Restart the system