Error Code List Chapter4. Cash & Check In Module
4-114
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I4830
[Deposit Count/Check]Timeout
occurs in initializing Escrow.
1. Open the BM2(7) and BM2(12) and
remove the residual media at the moving
path (8, 9, 10).
2. Execute initialization.
I4831
[Deposit Count/Check]After
moving the media at the Escrow to
the Reject, jam occurs at the
Escrow entry sensor or 3-Way
Gate 2 control sensor (FDS15 or
FDS12).
1. Open the BM2(12) and remove the
residual media at the moving path (8, 9,
10, 12).
2. Execute initialization.
I4832
[Deposit Count/Check]BM2
moving part is open.
1. Check the BM2(7) Lock state.
2. Execute initialization.
I4833
[Deposit Count/Check]BM3
moving part is open.
1. Check the BM2(7) Lock state.
2. Execute initialization.
I4834
[Deposit Count/Check]CCIM is not
detected on the home position.
1. Mount the CCIM on the home
position.
I4835
[Deposit Count/Check]SCM Cover
Open
1. Check the SCM(2) Lock state.
2. Execute initialization.
I4836
[Deposit Count/Check]Cassette2
is not on the home position.
1. Check whether the Cassette2(15) is
on the home position.
2. Execute initialization.
I4841
[Deposit Count/Check]Timeout
occurs in operation.
1. Remove the residual media in the
device.
2. Execute initialization.
I4842
[Deposit Count/Check]Timeout
occurs in operation.
1. Remove the residual media in the
device.
2. Execute initialization.
I4843
[Deposit Count/Check] A
undefined command is received
with the additional byte of Initialize
command.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I4844
[Deposit Count/Check]Media
remaining at the Print part
1. Open the BM2(12) and remove the
residual media at the moving path (10,
11).
2. Execute initialization.
I4845
[Deposit Count/Check]PRS02
Dark when executing initialization
while INK is mounted.
1. Open the BM2(12) and remove the
residual media at the moving path (10,
11).
2. Execute initialization.
I4846
[Deposit Count/Check]INK
cartridge ASSY is not on the home
position.
1. Mount the INK cartridge ASSY on the
home position.
I4851
[Deposit Count/Check]ALG,
moving path motors do not run.
1. Remove the residual media in the
device.
2. Execute initialization.
I4852
[Deposit Count/Check]PRT, RT
Box, Reject entry part motors do
not run.
1. Remove the residual media in the
device.
2. Execute initialization.
I4855
[Deposit Count/Check]Media
remain on the moving path.
1. Remove the residual media in the
device.
2. Execute initialization.
I4859
[Deposit Count/Check]After
unwinding Escrow, PRS01,
RJS08, FDS09, FDS12, FDS18
detection error occurs.
1. Remove the residual media in the
device.
2. Execute initialization.