Nautilus Hyosung MX8800, Manual, Page: 813 / 827

Error Code List Chapter4. Cash & Check In Module
4-260 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I9E08 [Retract]Error occurred by the
Transport Path on the BCS02 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I9E09 [Retract]Error occurred by the
Transport Path on the
BCS01,BCS02 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I9E0A [Retract]Error occurred by the
Transport Path on the FDS15 1. Open the BM4 moving path and then
remove the residual media and alien
materials.
I9E0B [Retract]Error occurred by the
Transport Path on the AAS06 1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I9E0C [Retract]Error occurred by the
Transport Path on the AAS05 1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
4. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.
I9E0D [Retract]Error occurred by the
Transport Path on the AAS03 1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I9E0E [Retract]Error occurred by the
Transport Path on the RCS01 1. Remove the internal media and alien
materials in the Recognition(5).
2. Initialize the device.
3. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I9E0F [Retract]Error occurred by the
Transport Path on the FDS07 1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I9E10 [Retract]Error occurred by the
Transport Path on the FDS23 1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I9E11 [Retract]Error occurred by the
Transport Path on the FDS09 1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I9E12 [Retract]Error occurred by the
Transport Path on the FDS12 1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)