Nautilus Hyosung MX8800, Manual

Page: 141 / 827

Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc. All Rights Reserved.
2-137
Code Problem Description Troubleshooting
544GB00 Encoder Sensor(GS407) for
Feed Motor failed to detect
Light status when Feed Motor
runs in stacking direction 1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #4 and
open its door.(D)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS407 works fine if
there is nothing jammed.
544GC00 Encoder Sensor(GS407) for
Feed Motor failed to detect
Dark status when Feed Motor
runs in stacking direction 1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #4 and
open its door.(D)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS407 works fine if
there is nothing jammed.
544J300 Failure to RC4 full check
during Deposit Cancel. 1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (D)
4. Check the stage status after open the
recycle cassette(D)
5. Check contamination status of the
GS412 sensor.
544R100 RC4 message timeout error
during operation ready in the
Deposit Cancel. 1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
544R200 RC4 message timeout error
during transation operation in
the Deposit Cancel . 1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
544R300 RC4 message timeout error
during postprocessing of
Deposit Cancel Error. 1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
544S100 Undefined return value of RC4
during Deposit Cancel. 1. Operate to initialize BRM(Recovery)
544S200 Undefined command of RC4
during Deposit Cancel. 1. Operate to initialize BRM(Recovery)
5450500 GS505 Light Jam during
Deposit Cancel. 1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the Jam on the recycle
cassette(18)
4. Rotate the knob of the Mid Transport
Path
5. Remove the Jam on the Mid
Transport Path(13).
5451100 GS501 sensor jam during
Deposit Cancel. 1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (E)
4. Put down the Stage after open the
recycle cassette door (E)
5. Remove substance
6. Check whether the sensor is
contaminated or not if there are No
notes or substance.