![background image](http://html1.mh-extra.com/html/nautilus-hyosung/mx8800/mx8800_manual_3517484583.webp)
Error Code List Chapter4. Cash & Check In Module
4-30
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I1B02
[Initialize]Jam at the Align
detection sensor (AAS02).
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I1B03
[Initialize]Align detection sensor
(AAS03) jam.
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I1B04
[Initialize]Recog detection sensor
(RCS01) jam.
1. Remove the internal media and alien
materials in the Recognition(5).
2. Initialize the device.
3. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I1B05
[Initialize]Align detection sensor
(AAS05) jam
1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
4. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.
I1B06
[Initialize]Jam at the Align entry
detection sensor (AAS06).
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I1B07
[Initialize]Jam at Recog exit
moving sensor (FDS07).
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I1B09
[Initialize]Jam at the second
moving path sensor (FDS09).
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I1B12
[Initialize]Jam at the 3Way2
control sensor (FDS12)
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I1B15
[Initialize]Jam at Escrow entry
sensor (FDS15)
1. Open the BM4 moving path and then
remove the residual media and alien
materials.
I1B16
[Initialize]Jam at RT Box entry
detection sensor (FDS16)
1. Open the BM3 moving path and then
remove the residual media and alien
materials.
2. Check the arrangement state of
banknotes in the RT box.