Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-75
Code
Problem Description
Troubleshooting
I3528
[Entry In/Out]When winding the
Escrow Drum and setting the tape
end, the tape end is not dark-
detected for 50 ms continuously
and if 45s is exceeded, a fault
occurs.
1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
I3529
[Entry In/Out]When detecting the
Escrow Drum hole, the drum hole
is not dark-detected (ESS01 or
ESS02 Dark) and if 150 ms is
exceeded, a fault occurs.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I352A
[Entry In/Out]When detecting the
Escrow Drum hole, the drum hole
is not light-detected (ESS01,
ESS02) after detecting the drum
hole dark and if 350 ms is
exceeded, a fault occurs.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I352B
[Entry In/Out] When both of
Escrow Tape Start (ESS06)
sensor and the End sensor are
detected simultaneously.
1. Open the Escrow Part(12).
2. Remove the ESS06 and ESS07
media and pollution.
3. Execute CCIM initialization.
I352C
[Entry In/Out]When checking the
residual in the Escrow and tape
end is detected so that retry is
made, the number of retries
exceeds the limit.
1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Execute CCIM initialization.
I352D
[Entry In/Out]After checking the
residual in the Escrow, tape start
is not detected for 100 mm and
14s is exceeded.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I352E
[Entry In/Out]The residual before
the Escrow entry or Drum is
detected (ESS04, ESS03) while
winding the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I352F
[Entry In/Out]The residual before
the Escrow entry or Drum is
detected (ESS04, ESS03) while
winding the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I3530
[Entry In/Out]The residual before
the Escrow entry or Drum is
detected (ESS04, ESS03) while
discharging the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I3531
[Entry In/Out]The residual before
the Escrow entry or Drum is
detected (ESS04, ESS03) while
discharging the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.