Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-35
Code
Problem Description
Troubleshooting
I1C0F
[Initialize]FDS07 Light Timeout
fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I1C10
[Initialize]FDS23 Light Timeout
fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I1C11
[Initialize]FDS09 Light Timeout
fault
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I1C12
[Initialize]FDS12 Light Timeout
fault
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I1C13
[Initialize]FDS18 Light Timeout
fault
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I1C14
[Initialize]NCS07 Light Timeout
fault
1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.
I1C15
[Initialize]RJS08 Light Timeout
fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I1C16
[Initialize]PRS01 Light Timeout
fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I1C17
[Initialize]FDS16 Light Timeout
fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I1C18
[Initialize]RTS02 Light Timeout
fault
1. Open the BM2(7) and remove the
residual media at the moving path (6, 7,
8, 9).
2. Remove the notes in the Retract Box.
3. Execute initialization.
I1C19
[Initialize]FDS19 Light Timeout
fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Execute initialization.
I1C1A
[Initialize]CCS07 Light Timeout
fault
1. Check whether the Cassette2(11) is
on the home position.
2. Execute initialization.