Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-219
Code
Problem Description
Troubleshooting
I8B25
[Deposit End]J Residual fault in
the SCM.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I8B26
[Deposit End]J Residual fault in
the SCM.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I8B27
[Deposit End]J Jam at the BC
entry sensor (BCS01).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I8B28
[Deposit End]J Jam at the BC
entry sensor (BCS02).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I8B29
[Deposit End]J Jam at the BC
entry sensor (BCS01,BCS02).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I8B2A
[Deposit End]JJam at Escrow
entry sensor (FDS15)
1. Open the BM4 moving path and then
remove the residual media and alien
materials.
I8B2B
[Deposit End]JJam at the Align
entry detection sensor (AAS06).
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I8B2C
[Deposit End]JAlign detection
sensor (AAS05) jam
1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
4. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.
I8B2D
[Deposit End]JAlign detection
sensor (AAS03) jam.
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I8B2E
[Deposit End]JRecog detection
sensor (RCS01) jam.
1. Remove the internal media and alien
materials in the Recognition(5).
2. Initialize the device.
3. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I8B2F
[Deposit End]JJam at Recog exit
moving sensor (FDS07).
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I8B30
[Deposit End]JJam at Recog exit
moving sensor (FDS23).
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.