![background image](http://html1.mh-extra.com/html/nautilus-hyosung/mx8800/mx8800_manual_3517484537.webp)
Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-533
Code
Problem Description
Troubleshooting
5V8S200
Receive abnormal BCC from
BC during System Info Read.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5V8S400
Receive ETC. error from BC
during System Info Read.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5V8S900
Receive retry error from BC
during System Info Read.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5VAA300
Status of BMU inter lock
detachment during System Info
Read.
1. Check Load/Removal of the upper
unit
5VAA400
Status of BMU removal before
excute System Info Read
command.
1. Check Load/Removal of the upper
unit
5VAA500
Status of Safe door open
before excute System Info
Read command.
1. Check the safe door open
5VAA700
Status of RJC removal before
excute System Info Read
command.
1. Open the lower unit
2. Open the Mid Transport Path
3. Check the reject CST(21)
Load/Removal
5VAA800
Status of BMD inter lock
detachment before excute
System Info Read command.
1. Check the lower Unit load/removal
2. Check the lower unit status of inter
lock
3. Exchange the cherry switch or clean
the inter lock sensor(or exchange) if
occur same error
5VAA900
Status of BMD removal before
excute System Info Read
command.
1. Check the lower Unit load/removal
2. Check the lower unit status of inter
lock
3. Exchange the cherry switch or clean
the inter lock sensor(or exchange) if
occur same error
5VAAA00
Status of BC open before
excute System Info Read
command.
1. Open the upper unit
2. Check the lock lever in the BC
5VAAB00
Status of RC full before excute
System Info Read command.
1. Open the lower unit
2. Open the Mid Transport Path
3. Check the GSx11 full detection
sensor of recycle cassettes(A~E)
4. Open the cassette door
5. Check the notes full in the cassette
5VAAC00
Status of RJC full before
excute System Info Read
command.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove reject cassette(21)
4. Remove notes after checking notes
full in the cassette
5. Check whether the sensor is
contaminated or not if a cassette is
empty.