Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-165
Code
Problem Description
Troubleshooting
I6602
[Deposit Cancel]Batch moving
stage down fail.
1. Check whether the reject batch return
stage down detection (RJS07) sensor is
normally running.
2. Check whether the multiple return
clamp motor (RJM01) is running.
I6603
[Deposit Cancel]Batch moving
stage up fail.
1. Check whether the reject batch return
stage up detection (RJS06) sensor is
normally running.
2. Check whether the multiple return
clamp motor (RJM01) is running.
I6604
[Deposit Cancel]Batch moving
stage sensor fault.
1. Check whether the reject batch return
stage down detection (RJS07) sensor is
normally running.
2. Check whether the multiple return
clamp motor (RJM01) is running.
I6605
[Deposit Cancel]The media at the
reject part is not moved to the
Bundle output check sensor
(RJS09) within a specified time.
1. Reject Door(9) Open
2. Remove the notes and alien materials
in the Reject.
3. If no alien material exists, check
whether the Reject part sensors (RJS01,
RJS02, RJS03, RJS04, RJS05, RJS08,
RJS09) and the sensor (RJS10)
detecting the media residual at the reject
output are polluted.
I6606
[Deposit Cancel]After moving the
media at the Reject part to the
Bundle, the media remains at the
Reject part.
1. Reject Door(9) Open
2. Remove the notes and alien materials
in the Reject.
3. If no alien material exists, check
whether the Reject part sensors (RJS01,
RJS02, RJS03, RJS04, RJS05, RJS08,
RJS09) and the sensor (RJS10)
detecting the media residual at the reject
output are polluted.
I6607
[Deposit Cancel]Before moving
the media at the Reject to the
Bundle, the billpress of the Bundle
part is not moved to the Reject
position.
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress,
Check and remove the alien materials
in the Bundle Bill Press part (BDS15,
BDS16) sensors.
4. If no alien material exists, check
whether the sensor is polluted.
I6608
[Deposit Cancel]When media are
piled at the Reject part, jam
occurs at the Reject output check
sensor (RJS08).
1. Remove the notes and alien materials
in the Reject output check sensor
(RJS08).
2. If no alien material exists, check
whether the sensor is polluted.
I6609
[Deposit Cancel]Alien media have
sequentially entered to the Reject
part.
1. Reject Door(9) Open
2. Remove the notes and alien materials
in the Reject.
3. If no alien material exists, check
whether the Reject output check sensor
(RJS08) is polluted.