Error Code List Chapter4. Cash & Check In Module
4-106
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I450A
[Deposit Count/Check]Residual
media at the Escrow (ESS01,
ESS02, ESS03, ESS04) when
reset the Escrow mode
1. Open the Escrow Part(12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.
I450B
[Deposit Count/Check] Residual
media at the Escrow output check
sensor before the Trigger sensor
detects deflecting when winding
the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I450C
[Deposit Count/Check]Escrow
Tape End (ESS07) detection fault
when executing media winding.
1. Open the Escrow part (12) and
remove the ESS07 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I450D
[Deposit Count/Check]Escrow Full
(ESS05) detection fault when
executing media winding.
1. Open the Escrow part (12) and
remove the ESS05 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I450E
[Deposit Count/Check]Light jam at
the Escrow output check sensor
(ESS04) when executing media
winding.
1. Open the Escrow Part(12).
2. Remove the media between the
Escrow entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I450F
[Deposit Count/Check]Dark jam at
the Escrow output check sensor
(ESS04) when executing media
winding.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization.
I4510
[Deposit Count/Check]Fault of
performing a undefined process
flow from Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I4511
[Deposit Count/Check]Jam
between the Escrow entry sensor
(ESS04) and (FDS15) while
storing the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I4512
[Deposit Count/Check]Jam
between the Escrow entry
(ESS04) and (FDS15) when
processing drum full while storing
the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I4513
[Deposit Count/Check]Escrow
Tape End (ESS07) detection fault
when executing media winding.
1. Open the Escrow part (12) and
remove the ESS07 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I4514
[Deposit Count/Check]Escrow Full
(ESS05) detection fault when
storing additional media while
terminating media winding.
1. Open the Escrow part (12) and
remove the ESS05 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I4515
[Deposit Count/Check]Fault of
performing a undefined process
flow from Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
