Error Code List Chapter4. Cash & Check In Module
4-100
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I4305
[Deposit Count/Check]Shutter
Open fault.
1. Check whether the part connected to
the external shutter normally operates.
2. Check whether the shutter driving
motor (BDM01) runs.
3. Check the motor connection cable.
I4306
[Deposit Count/Check]Shutter
Close fault.
1. Check whether the part connected to
the external shutter normally operates.
2. Check whether the shutter driving
motor (BDM01) runs.
3. Check the motor connection cable.
I4307
[Deposit Count/Check]Billpress
sensor fault.
1. Check and remove the alien materials
in the Bundle Bill Press part (BDS15,
BDS16) sensors.
2. If no alien material exists, check
whether the sensor is polluted.
I4308
[Deposit Count/Check]Billpress
moving path position startup fault
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress, check and remove the alien
materials in the Bundle Bill Press home
Position (BDS15) sensor.
4. If no alien material exists, check
whether the sensor is polluted.
I4309
[Deposit Count/Check]Billpress
separation position startup fault.
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If the Billpress is up, check whether
the state is BDS18 Dark.
4. If it is not dark, move the P Roller and
check whether the state of BDS18 is
changed.
I430A
[Deposit Count/Check]Billpress
residual position startup fault.
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress, check and remove the alien
materials in the Bundle Bill Press
Up/Down (BDS16) sensor.
4. If no alien material exists, check
whether the sensor is polluted
I430B
[Deposit Count/Check]Billpress
Reject position startup fault.
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress, check and remove the alien
materials in the Bundle Bill Press part
(BDS15, BDS16) sensors.
4. If no alien material exists, check
whether the sensor is polluted
I430D
[Deposit Count/Check]Media
remaining at the Bundle.
1. Check the inside of the Bundle(1).
2. Remove the notes and alien materials
in the Bundle(1).
3. If no alien material exists, check
whether the sensor in the Bundle(1) is
polluted.