![background image](http://html1.mh-extra.com/html/nautilus-hyosung/mx8800/mx8800_manual_3517484089.webp)
Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-85
Code
Problem Description
Troubleshooting
533G200
Failure to move stack position
of RC3 PP during Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Open the recycle cassette door (C)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
533G400
Failure to upword moving of
PP during RC3 stack roller
retreat movement in the
Deposit End .
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Open the recycle cassette door (C)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
533G500
Failure of RC3 stack roller
retreat RC3 during Deposit
End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Put down the Stage after open the
recycle cassette door (C)
5. Check the jam removal knob rotates
softly
533G600
Exceeds retry count limit of
detecting RC3 stack
roller´s falling back and
avoiding during Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Put down the Stage after open the
recycle cassette door (C)
5. Check the jam removal knob rotates
softly
533G800
Failure to RC3 push pressure
movement of during Deposit
End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Put down the Stage after open the
recycle cassette door (C)
5. Check the upper side of the recycle
cassette
533GA00
RC3 solenoid echo error
during Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Reload the recycle cassette (C) after
removing recycle cassette
4. Replace the cassette when same
error occurs
533GB00
Encoder Sensor(GS307) for
Feed Motor failed to detect
Light status when Feed Motor
runs in stacking direction
during Deposit End.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #3 and
open its door.(C)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS307 works fine if
there is nothing jammed.