Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-163
Code
Problem Description
Troubleshooting
I651C
[Deposit Cancel]Residual media in
the Escrow (ESS01, ESS02) when
preparing for media discharge.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I6520
[Deposit Cancel]For Escrow Drum
winding (50ms+2591Step), the
tape start is not light-detected for
50ms continuously, and a fault
occurs when 6s is exceeded.
1. Open the Escrow Part(12).
2. Remove the ESS06 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
I6521
[Deposit Cancel]For Escrow Drum
winding (50ms+2591Step), the
Drum motor is not stopped and a
fault occurs when a timeout
occurs.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I6522
[Deposit Cancel]For Escrow Drum
winding (50ms+5730Step), the
tape start is not light-detected for
50ms continuously, and a fault
occurs when 6s is exceeded.
1. Open the Escrow Part(12).
2. Remove the ESS06 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
I6523
[Deposit Cancel]For Escrow Drum
winding (50ms+5730Step), the
Drum motor is not stopped and a
fault occurs when a timeout
occurs.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I6524
[Deposit Cancel]Residual media at
the Escrow entry (ESS03, ESS04)
when detecting tape start (45s) by
unwinding the Escrow Drum
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I6525
[Deposit Cancel]When rewinding
the Escrow Drum and detecting
the tape start (45s), the tape start
is not light-detected for 50 ms
continuously and if 45s is
exceeded, a fault occurs.
1. Open the Escrow Part(12).
2. Remove the ESS06 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
I6526
[Deposit Cancel]Residual media at
the Escrow entry (ESS03, ESS04)
when detecting tape start
(2093Step) by unwinding the
Escrow Drum
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I6527
[Deposit Cancel]Residual media at
the Escrow entry part (ESS03,
ESS04) when setting the tape end
position by winding the Escrow
Drum
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I6528
[Deposit Cancel]When winding the
Escrow Drum and setting the tape
end, the tape end is not dark-
detected for 50 ms continuously
and if 45s is exceeded, a fault
occurs.
1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
