![background image](http://html1.mh-extra.com/html/nautilus-hyosung/mx8800/mx8800_manual_3517484568.webp)
Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-15
Code
Problem Description
Troubleshooting
I13F0
[Initialize]Bundle Task Skip.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I13FF
[Initialize]Bundle Task force shut
down.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I1401
[Initialize]BC Task Skip.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I1402
[Initialize]BC Task force shut
down.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I1403
[Initialize]Fault of calling a
undefined command from BC.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I1404
[Initialize]Fault of performing a
undefined process flow from BC.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I1405
[Initialize] Fault of exceeding the
limit of retries when BC does not
respond.
1. Check the cable connecting between
Main and BC (Connector CN37).
I1406
[Initialize] BC response command
error.
1. Check the cable connecting between
Main and BC (Connector CN37).
I1407
[Initialize] Anomaly of BCC
received from BC.
1. Check the cable connecting between
Main and BC (Connector CN37).
I1501
[Initialize]Fault of calling a
undefined command from Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I1502
[Initialize]Fault of performing a
undefined process flow from
Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I1503
[Initialize]Escrow entry when
preparing for media winding when
Escrow has media
(ESS03, ESS04) residual fault
1. Escrow Part(12) Open
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I1504
[Initialize]Tape End when
preparing for media winding when
Escrow has media
(ESS07) Detection fault.
1. Escrow Part(12) Open
2. Manually remove media from Escrow.
3. Initialize.
I1505
[Initialize]Escrow entry (ESS03,
ESS04) residual fault when
preparing for media winding when
Escrow has no media
1. Escrow Part(12) Open
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I1506
[Initialize]Escrow internal
(ESS01,02,03,04) residual fault
when preparing for media winding
when Escrow has no media
1. Escrow Part(12) Open
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.