Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-173
Code
Problem Description
Troubleshooting
I6B2B
[Deposit Cancel]JJam at the Align
entry detection sensor (AAS06).
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I6B2C
[Deposit Cancel]JAlign detection
sensor (AAS05) jam
1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
4. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.
I6B2D
[Deposit Cancel]JAlign detection
sensor (AAS03) jam.
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I6B2E
[Deposit Cancel]JRecog detection
sensor (RCS01) jam.
1. Remove the internal media and alien
materials in the Recognition(5).
2. Initialize the device.
3. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I6B2F
[Deposit Cancel]JJam at Recog
exit moving sensor (FDS07).
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I6B30
[Deposit Cancel]JJam at Recog
exit moving sensor (FDS23).
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I6B31
[Deposit Cancel]JJam at the
second moving path sensor
(FDS09).
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I6B32
[Deposit Cancel]JJam at the
3Way2 control sensor (FDS12)
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I6B33
[Deposit Cancel]JJam at
Cassette1 entry detection sensor
(FDS18)
1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.
I6B34
[Deposit Cancel]JJam at the
sensor (NCS07) detecting the
number of papers which enter into
the Cassette1.
1. Check residual media or alien
materials at the Cassette1(14) entry and
remove those.