Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-515
Code
Problem Description
Troubleshooting
5QAE400
Retract CSM + TE transaction
was executed without
Initializing after power on .
1. Restart over AP-SP
2. Do transation operation follow by set
up read system Info for TM Test-> Initail
Info Set -> Initialization
5QAE600
Error to received Retract CSM
+ TE. during TE Button
Operating.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5QAEE00
RBU RS485 communication
sequence disorder during
Retract CSM + TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5QAEF00
RBU RS485 connection line
disorder during Retract CSM +
TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5QAH500
Error to
NVRAM(128denominations)
Read/ Write during Retract
CSM + TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization.
5QAR100
Message timeout error during
operation ready in the Retract
CSM + TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5QAR300
Message timeout error during
postprocessing to Retract CSM
+ TE Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5QAR700
RBU response message
timeout error during Retract
CSM + TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5QBH100
RC1 EEPROM read error
during Retract CSM + TE.
1. Check the RC Connector
2. Reload the RC after removing RC
3. Replace the RC if same error occures
during initialization
5QBH200
RC2 EEPROM read error
during Retract CSM + TE.
1. Check the RC Connector
2. Reload the RC after removing RC
3. Replace the RC if same error occures
during initialization
5QBH300
RC3 EEPROM read error
during Retract CSM + TE.
1. Check the RC Connector
2. Reload the RC after removing RC
3. Replace the RC if same error occures
during initialization
5QBH400
RC4 EEPROM read error
during Retract CSM + TE.
1. Check the RC Connector
2. Reload the RC after removing RC
3. Replace the RC if same error occures
during initialization
5QBH500
RC5 EEPROM read error
during Retract CSM + TE.
1. Check the RC Connector
2. Reload the RC after removing RC
3. Replace the RC if same error occures
during initialization