Nautilus Hyosung MX8800, Manual

Page: 666 / 827

Chapter4. Cash & Check In Module Error Code Manual
© 2014 Nautilus Hyosung Inc. All Rights Reserved.
4-113
Code Problem Description Troubleshooting
I4815 [Deposit Count/Check]Timeout
occurs in operation. 1. Remove the residual media in the
device.
2. Execute initialization.
I4816 [Deposit Count/Check]The media
passed AAS06 is not detected and
light-jammed at FDS09 1. Open ALG(4), RECOG(4), moving
path (5), and BM2(7).
2. Remove the residual media in ALG
and moving paths (5, 6, 7).
2. Execute initialization.
I4817 [Deposit Count/Check]Timeout
occurs in operation. 1. Remove the residual media in the
device.
2. Execute initialization.
I4818 [Deposit Count/Check]Timeout
occurs in operation. 1. Remove the residual media in the
device.
2. Execute initialization.
I4819 [Deposit Count/Check]Failed to
inhale the media 1. Remove the residual media in the
device.
2. Execute initialization.
I481B [Deposit Count/Check]When
executing Retract, timeout occurs
while picking up back the media. 1. Remove the residual media in the
device.
2. Execute initialization.
I4823 [Deposit Count/Check]BC Cover
Open fault. 1. Remount the BC Cover(3) and
execute initialization.
2. If the fault is not recovered, reboot the
system.
I4829 [Deposit Count/Check]Media
remaining at the Bundle 1. Remove the residual media at the
Bundle part (1).
2. Execute initialization.
I482A [Deposit Count/Check]The
number of notes calculated
internally is different from the
number of notes which passed the
Reject part. 1. Open the BM2(7) and BM2(12) and
remove the residual media at the moving
path (8, 9, 10).
2. Execute initialization.
I482B [Deposit Count/Check]The
number of notes calculated
internally is different from the
number of notes which passed the
Escrow part. 1. Open the BM2(12) and remove the
residual media at the moving path (8,
10, 12).
2. Execute initialization.
I482C [Deposit Count/Check]Timeout
occurs when moving the media at
the Reject to the Bundle. 1. Remove the residual media at the
Bundle(1), SCM(2), and moving part (9).
2. Execute initialization.
I482D [Deposit Count/Check]Timeout
occurs when moving the media at
the Reject to the Bundle and
processing them. 1. Remove the residual media at the
Bundle(1), SCM(2), and moving part (9).
2. Execute initialization.
I482E [Deposit Count/Check]Timeout
occurs when checking the residual
media in the Bundle. 1. Remove the residual media at the
Bundle(1), SCM(2), and moving part (9).
2. Execute initialization.
I482F [Deposit Count/Check]Timeout
occurs when moving the media at
the Escrow to the Reject. 1. Open the BM2(7) and BM2(12) and
remove the residual media at the moving
path (8, 9, 10).
2. Execute initialization.