Error Code List Chapter4. Cash & Check In Module
4-202
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I7C0C
[Deposit OK]JAAS05 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I7C0D
[Deposit OK]JAAS03 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I7C0E
[Deposit OK]JRCS01 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I7C0F
[Deposit OK]JFDS07 Light
Timeout fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I7C10
[Deposit OK]JFDS23 Light
Timeout fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I7C11
[Deposit OK]JFDS09 Light
Timeout fault
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I7C12
[Deposit OK]JFDS12 Light
Timeout fault
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I7C13
[Deposit OK]JFDS18 Light
Timeout fault
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I7C14
[Deposit OK]JNCS07 Light
Timeout fault
1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.
I7C15
[Deposit OK]JRJS08 Light
Timeout fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I7C16
[Deposit OK]JPRS01 Light
Timeout fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I7C17
[Deposit OK]JFDS16 Light
Timeout fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I7C18
[Deposit OK]JRTS02 Light
Timeout fault
1. Open the BM2(7) and remove the
residual media at the moving path (6, 7,
8, 9).
2. Remove the notes in the Retract Box.
3. Execute initialization.
