Nautilus Hyosung MX8800, Manual

Page: 577 / 827

Error Code List Chapter4. Cash & Check In Module
4-24 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I182F [Initialize]Timeout occurs when
moving the media at the Escrow to
the Reject. 1. Open the BM2(7) and BM2(12) and
remove the residual media at the moving
path (8, 9, 10).
2. Execute initialization.
I1830 [Initialize]Timeout occurs in
initializing Escrow. 1. Open the BM2(7) and BM2(12) and
remove the residual media at the moving
path (8, 9, 10).
2. Execute initialization.
I1831 [Initialize]After moving the media
at the Escrow to the Reject, jam
occurs at the Escrow entry sensor
or 3-Way Gate 2 control sensor
(FDS15 or FDS12). 1. Open the BM2(12) and remove the
residual media at the moving path (8, 9,
10, 12).
2. Execute initialization.
I1832 [Initialize]BM2 moving path is
open. 1. Check the BM2(7) Lock state.
2. Execute initialization.
I1833 [Initialize]BM3 moving path is
open. 1. Check the BM2(7) Lock state.
2. Execute initialization.
I1834 [Initialize]CCIM is not detected on
the home position. 1. Mount the CCIM on the home
position.
I1835 [Initialize]SCM Cover Open 1. Check the SCM(2) Lock state.
2. Execute initialization.
I1836 [Initialize]Cassette2 is not on the
home position. 1. Check whether the Cassette2(15) is
on the home position.
2. Execute initialization.
I1841 [Initialize]Timeout occurs in
operation. 1. Remove the residual media in the
device.
2. Execute initialization.
I1842 [Initialize]Timeout occurs in
operation. 1. Remove the residual media in the
device.
2. Execute initialization.
I1843 [Initialize] A undefined command
is received with the additional byte
of Initialize command. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I1844 [Initialize]Media remain at the Print
part. 1. Open the BM2(12) and remove the
residual media at the moving path (10,
11).
2. Execute initialization.
I1845 [Initialize]PRS02 Dark when
executing initialization while INK is
mounted. 1. Open the BM2(12) and remove the
residual media at the moving path (10,
11).
2. Execute initialization.
I1846 [Initialize]INK cartridge ASSY is
not on the home position. 1. Mount the INK cartridge ASSY on the
home position.
I1851 [Initialize]ALG, Recog moving path
motors do not run. 1. Remove the residual media in the
device.
2. Execute initialization.
I1852 [Initialize]PRT, RT Box, Reject
entry part motors do not run. 1. Remove the residual media in the
device.
2. Execute initialization.
I1855 [Initialize]Media remain on the
moving path. 1. Remove the residual media in the
device.
2. Execute initialization.
I1859 [Initialize]After unwinding Escrow,
PRS01, RJS08, FDS09, FDS12,
FDS18 detection error occurs. 1. Remove the residual media in the
device.
2. Execute initialization.