Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-315
Code
Problem Description
Troubleshooting
5A8HG21
Error of power on during
receiving BCU ready command
in the Retract CSM .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
5A8HG22
Error of DD sensor initialization
during receiving BCU ready
command in the Retract CSM .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
5A8HG23
Error of set up for DD sensor
DAC during receiving BCU
ready command in the Retract
CSM .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
5A8HG24
Error of encoder set-up mode
during receiving BCU ready
command in the Retract CSM .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
5A8HG36
Error of recognized mode
during receiving BCU mode
command in the Retract CSM .
1. Check to the recoginzed mode
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
5A8HG37
Error of transaction setting
during receiving BCU mode
command in the Retract CSM .
1. Check to the transaction setting
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
5A8R100
BC message timeout error
during Retract CSM Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5A8R200
BC message timeout error
during Retract CSM
Transaction.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5A8R300
BC message timeout error
during postprocessing to
Retract CSM Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5A8R900
BC message timeout error
during Retract CSM.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization