Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-55
Code
Problem Description
Troubleshooting
528HF06
Error to BC FPGA
configuration during Deposit
Count.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
528HF07
Error to load to info of BC
FPGA header during Deposit
Count.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
528HF08
Error to FPGA initialize during
Deposit Count.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
528HF09
Error to FPGA Read during
Deposit Count.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
528HF11
Error to load recognition DB
#01 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HF12
Error to load recognition DB
#02 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HF13
Error to load recognition DB
#03 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HF14
Error to load recognition DB
#04 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HF15
Error to load recognition DB
#05 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HF16
Error to load recognition DB
#06 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HF17
Error to load recognition DB
#07 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HF18
Error to load recognition DB
#08 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HF19
Error to load recognition DB
#09 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HF20
Error to load recognition DB
#10 during Deposit Count.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
528HG01
Error of mode set up during
BCU Mode Command in the
Deposit Count.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization
528HG02
Error of the recognition level
set up during BCU mode
command in the Deposit
Count.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization
528HG03
Error of the transaction ready
set up during BCU ready
command in the Deposit
Count.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred after initialization