Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-139
Code
Problem Description
Troubleshooting
I5603
[Deposit Reject]Batch moving
stage up fail.
1. Check whether the reject batch return
stage up detection (RJS06) sensor is
normally running.
2. Check whether the multiple return
clamp motor (RJM01) is running.
I5604
[Deposit Reject]Batch moving
stage sensor fault.
1. Check whether the reject batch return
stage down detection (RJS07) sensor is
normally running.
2. Check whether the multiple return
clamp motor (RJM01) is running.
I5605
[Deposit Reject]The media at the
reject part is not moved to the
Bundle output check sensor
(RJS09) within a specified time.
1. Reject Door(9) Open
2. Remove the notes and alien materials
in the Reject.
3. If no alien material exists, check
whether the Reject part sensors (RJS01,
RJS02, RJS03, RJS04, RJS05, RJS08,
RJS09) and the sensor (RJS10)
detecting the media residual at the reject
output are polluted.
I5606
[Deposit Reject]After moving the
media at the Reject part to the
Bundle, the media remains at the
Reject part.
1. Reject Door(9) Open
2. Remove the notes and alien materials
in the Reject.
3. If no alien material exists, check
whether the Reject part sensors (RJS01,
RJS02, RJS03, RJS04, RJS05, RJS08,
RJS09) and the sensor (RJS10)
detecting the media residual at the reject
output are polluted.
I5607
[Deposit Reject]Before moving the
media at the Reject to the Bundle,
the billpress of the Bundle part is
not moved to the Reject position.
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress,
Check and remove the alien materials
in the Bundle Bill Press part (BDS15,
BDS16) sensors.
4. If no alien material exists, check
whether the sensor is polluted.
I5608
[Deposit Reject]When media are
piled at the Reject part, jam
occurs at the Reject output check
sensor (RJS08).
1. Remove the notes and alien materials
in the Reject output check sensor
(RJS08).
2. If no alien material exists, check
whether the sensor is polluted.
I5609
[Deposit Reject]Alien media have
sequentially entered to the Reject
part.
1. Reject Door(9) Open
2. Remove the notes and alien materials
in the Reject.
3. If no alien material exists, check
whether the Reject output check sensor
(RJS08) is polluted.
I560A
[Deposit Reject]When media
abnormally access and are piled
at the Reject part, the residual
media exist at the Reject part
(RJS10 Dark).
1. Remove the notes and alien materials
in the Reject output media residual
sensor (RJS10).
2. If no alien material exists, check
whether the sensor is polluted.