Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-216
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
572G600
Exceeds retry count limit of
detecting RC2 stack
roller´s falling back and
avoiding during Withdrawal.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (A)
4. Put down the Stage after open the
recycle cassette door (A)
5. Check the jam removal knob rotates
softly
572G700
Failure to move RC2 feed
roller to home position during
Withdrawal.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (A)
4. Put down the Stage after open the
recycle cassette door (A)
5. Check the jam removal knob rotates
softly
572G800
Failure to RC2 push pressure
movement during Withdrawal.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (A)
4. Put down the Stage after open the
recycle cassette door (A)
5. Check the upper side of the recycle
cassette
572GA00
RC2 solenoid echo error
during Withdrawal .
1. Open the lower unit
2. Open the Mid Transport Path
3. Reload the recycle cassette (B) after
removing recycle cassette
4. Replace the cassette when same
error occurs
572GB00
Encoder Sensor(GS207) for
Feed Motor failed to detect
Light status when Feed Motor
runs in stacking direction
during Withdrawal .
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #2 and
open its door.(B)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS207 works fine if
there is nothing jammed.
572GC00
Encoder Sensor(GS207) for
Feed Motor failed to detect
Dark status when Feed Motor
runs in stacking direction
during Withdrawal .
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #2 and
open its door.(B)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS207 works fine if
there is nothing jammed.
572J200
RC2 empty during Withdrawal.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (B)
4. Check the notes remain after Open
the recycle cassette door(B)
5. Fill up the Notes if there are no notes
6. Check whether the sensor is
contaminated if there are Notes.
572K100
Requried separate note count
of RC2 is 0 during Withdrawal.
1. Operate to initialize BRM(Recovery)