Error Code List Chapter4. Cash & Check In Module
4-108
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I4524
[Deposit Count/Check]Residual
media at the Escrow entry
(ESS03, ESS04) when detecting
tape start (45s) by unwinding the
Escrow Drum
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I4525
[Deposit Count/Check]When
rewinding the Escrow Drum and
detecting the tape start (45s), the
tape start is not light-detected for
50 ms continuously and if 45s is
exceeded, a fault occurs.
1. Open the Escrow Part(12).
2. Remove the ESS06 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
I4526
[Deposit Count/Check]Residual
media at the Escrow entry
(ESS03, ESS04) when detecting
tape start (2093Step) by
unwinding the Escrow Drum
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I4527
[Deposit Count/Check]Residual
media at the Escrow entry part
(ESS03, ESS04) when setting the
tape end position by winding the
Escrow Drum
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I4528
[Deposit Count/Check]When
winding the Escrow Drum and
setting the tape end, the tape end
is not dark-detected for 50 ms
continuously and if 45s is
exceeded, a fault occurs.
1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Check Motor (ESM01)
4. Execute CCIM initialization.
I4529
[Deposit Count/Check]When
detecting the Escrow Drum hole,
the drum hole is not dark-detected
(ESS01 or ESS02 Dark) and if
150 ms is exceeded, a fault
occurs.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I452A
[Deposit Count/Check]When
detecting the Escrow Drum hole,
the drum hole is not light-detected
(ESS01, ESS02) after detecting
the drum hole dark and if 350 ms
is exceeded, a fault occurs.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I452B
[Deposit Count/Check] When both
of Escrow Tape Start (ESS06)
sensor and the End sensor are
detected simultaneously.
1. Open the Escrow Part(12).
2. Remove the ESS06 and ESS07
media and pollution.
3. Execute CCIM initialization.
I452C
[Deposit Count/Check]When
checking the residual media in the
Escrow and tape end is detected
so that retry is made, the number
of retries exceeds the limit.
1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Execute CCIM initialization.
I452D
[Deposit Count/Check]After
checking the residual media in the
Escrow, tape start is not detected
for 100 mm and 14s is exceeded.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
