![background image](http://html1.mh-extra.com/html/nautilus-hyosung/mx8800/mx8800_manual_3517484104.webp)
Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-100
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
538S400
Receive ETC. error from BC
during Deposit End.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
538S900
Receive retry error from BC
during Depost End.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5391300
RJC GSA03 dark jam error
during Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Open the reject cassette(21)
4. Remove notes and substance in the
reject cassette(21)
5. Check whether the sensor is
contaminated or not if there are No
notes or substance
5391500
RJC GSA05 dark jam error
druing Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Open the reject cassette(21)
4. Remove notes and substance in the
reject cassette(21)
5. Check whether the sensor is
contaminated or not if there are No
notes or substance
539J100
RJC full detection error during
Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove reject cassette(21)
4. Remove notes after checking notes
full in the cassette
5. Check whether the sensor is
contaminated or not if a cassette is
empty.
539P100
RJC motor error during
Deposit End.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove reject cassette(21)
4. Check the stage after open the door
and push the lever
5. Check the sensor.
539R100
RJC message timeout error
during operation ready in the
Deposit End.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
539R200
RJC message timeout error
during transaction operation in
the Deposit End.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
539R300
RJC message timeout error
during postprocessing of
Deposit End Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization