Nautilus Hyosung MX8800, Manual, Page: 741 / 827

Error Code List Chapter4. Cash & Check In Module
4-188 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I7506 [Deposit OK]Escrow internal
(ESS01,02,03,04) residual fault
when preparing for media winding
when Escrow has no media 1. Open the Escrow Part(12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.
I7507 [Deposit OK]Residual media at the
Escrow entry part (ESS03,
ESS04) when preparing for media
output 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I7508 [Deposit OK]Escrow Tape
Start(ESS06) detection fault when
preparing for media output. 1. Open the Escrow part (12) and
remove the ESS06 media and pollution.
2. Rotate the Escrow Knob in clock-wise
three times.
3. Execute CCIM initialization.
I7509 [Deposit OK]Residual media at the
Escrow entry part (ESS03,
ESS04) when reset the Escrow
mode 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I750A [Deposit OK]Residual media at the
Escrow (ESS01, ESS02, ESS03,
ESS04) when reset the Escrow
mode 1. Open the Escrow Part(12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.
I750B [Deposit OK] Residual media at
the Escrow output check sensor
before the Trigger sensor detects
deflecting when winding the
media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I750C [Deposit OK]Escrow Tape End
(ESS07) detection fault when
executing media winding. 1. Open the Escrow part (12) and
remove the ESS07 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I750D [Deposit OK]Escrow Full (ESS05)
detection fault when executing
media winding. 1. Open the Escrow part (12) and
remove the ESS05 media and pollution.
2. Rotate the Escrow Knob in
counterclock-wise three times.
3. Execute CCIM initialization.
I750E [Deposit OK]Light jam at the
Escrow output check sensor
(ESS04) when executing media
winding. 1. Open the Escrow Part(12).
2. Remove the media between the
Escrow entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.
I750F [Deposit OK]Dark jam at the
Escrow output check sensor
(ESS04) when executing media
winding. 1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization.
I7510 [Deposit OK]Fault of performing a
undefined process flow from
Escrow. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.