![background image](http://html1.mh-extra.com/html/nautilus-hyosung/mx8800/mx8800_manual_3517484784.webp)
Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-231
Code
Problem Description
Troubleshooting
I8F13
[Deposit End]JError occurred by
the Return Transport
Path( FDS18)
1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.
I8F14
[Deposit End]JError occurred by
the Return Transport
Path( NCS07)
1. Check residual media or alien
materials at the Cassette1(14) entry and
remove those.
I8F15
[Deposit End]JError occurred by
the Return Transport
Path( RJS08)
1. Remove the residual media in the
device.
2. Execute initialization.
I8F16
[Deposit End]JError occurred by
the Return Transport
Path( PRS01)
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I8F17
[Deposit End]JError occurred by
the Return Transport
Path( FDS16)
1. Open the BM3 moving path and then
remove the residual media and alien
materials.
2. Check the arrangement state of
banknotes in the RT box.
I8F18
[Deposit End]JError occurred by
the Return Transport
Path( RTS02)
1. Open the BM2(7) and remove the
residual media at the moving path (6, 7,
8, 9).
2. Remove the notes in the Retract Box.
3. Execute initialization.
I8F19
[Deposit End]JError occurred by
the Return Transport
Path( FDS19)
1. Remove the residual media at the
Cassette2 entry (11).
2. Execute initialization.
I8F1A
[Deposit End]JError occurred by
the Return Transport
Path( CCS07)
1. Check residual media or alien
materials at the Cassette2(15) entry and
remove those.
I90C1
[Retract] Receives undefined USB
CONTROL command.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I90C2
[Retract]A wrong size is received
during USB CONTROL PIPE
communication.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I90C3
[Retract]The size of USB bulk data
is 0 or not the multiple of 64.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I90CF
[Retract]Fault of transmitting the
same seq of SP.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9301
[Retract] Low-speed moving
sensor fault.
1. Open the door at the Bundle side and
remove the residual media.
2. Check and remove the alien materials
in the Bundle low-speed wheel position
control (BDS14) sensor.
3. If no alien material exists, check
whether the sensor is polluted.
4. Initialize the device.