Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-29
Code
Problem Description
Troubleshooting
51AR200
Message timeout error during
transation operation in the
Deposit Ready .
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
51AR300
CSM message timeout error
during postprocessing
ofDeposit Ready Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
51AR700
Message timeout error of RBU
response during Deposit
Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
51ARC00
Message timeout error of BC
response during Deposit
Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
51ARJ00
Message timeout error during
ready stop of Deposit Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
51BS000
RBU communication timeout
error during Deposit Ready.
1. Reboot the system
51BS100
RBU connection sequence
error during Deposit Ready.
1. Reboot the system
51BS200
RBU connection MI error
during Deposit Ready.
1. Reboot the system
51US100
USB sequence duplicated
number error during Deposit
Ready.
1. Restart over AP-SP
51US300
USB command data length
error during Deposit Ready.
1. Reboot the system
5200100
GS801 light jam error during
Deposit Count.
1. Open the upper unit.
2. Check the Front Transport Path(4)
knob rotates softly
3.Check remained Notes and substance
in the upper Transport Path
4. Open the customer service module
(CSM)
5. Open the BC(5)
6.Remove notes and substance in the
Front Transport Path(4)
7. Check whether the sensor is
contaminated or not if there are No
notes or substance
5200300
GS003 light jam error during
Deposit Count.
1. Open the upper unit.
2. Open CSM and TE(12)
3. Open BC(5) and Rear Transport
Path(6)
4. Remove the Jam between BC(5) and
Rear Transport Path(6)