Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-125
Code
Problem Description
Troubleshooting
541G200
Failure to move stack position
of RC1 PP during Deposit
Cancel.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (A)
4. Open the recycle cassette door(A)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
541G400
Failure to upword moving of
PP during RC1 stack roller
retreat movement in the
Deposit Cancel .
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (A)
4. Open the recycle cassette door(A)
5. Check cassette status to move stage
up and down
6. Check the lower edge of the
door´s right side(Key part) if you
don´t find any problem
541G500
Failure of RC1 stack roller
retreat during Deposit Cancel.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (A)
4. Put down the Stage after open the
recycle cassette door (A)
5. Check the jam removal knob rotates
softly
541G600
Exceeds retry count limit of
detecting RC1 stack
roller´s falling back and
avoiding during Deposit
Cancel.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (A)
4. Put down the Stage after open the
recycle cassette door (A)
5. Check the jam removal knob rotates
softly
541G800
Failure to RC1 push pressure
movement during Deposit
Cancel.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (A)
4. Put down the Stage after open the
recycle cassette door (A)
5. Check the upper side of the recycle
cassette
541GA00
RC1 solenoid echo error duing
Deposit Cancel.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette(A) and
reload
4. Replace the cassette when same
error occurs
541GB00
Encoder Sensor(GS107) for
Feed Motor failed to detect
Light status when Feed Motor
runs in stacking direction duing
Deposit Cancel.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #1 and
open its door.(A)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS107 works fine if
there is nothing jammed.