Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-237
Code
Problem Description
Troubleshooting
I9501
[Retract]Fault of calling a
undefined command from Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9502
[Retract]Fault of performing a
undefined process flow from
Escrow.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9503
[Retract]Escrow entry (ESS03,
ESS04) residual fault when
preparing for media winding when
Escrow has the media
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I9504
[Retract]Tape End when preparing
for media winding when Escrow
has media
(ESS07) Detection fault.
1. Open the Escrow Part(12).
2. Manually remove media from Escrow.
3. Initialize.
I9505
[Retract]Escrow entry (ESS03,
ESS04) residual fault when
preparing for media winding when
Escrow has no media
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I9506
[Retract]Escrow entry (ESS02,
ESS03, ESS04) residual fault
when preparing for media
winding when Escrow has no
media
1. Open the Escrow Part(12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.
I9507
[Retract]Residual media at the
Escrow entry part (ESS03,
ESS04) when preparing for media
output
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I9508
[Retract]Escrow Tape
Start(ESS06) detection fault when
preparing for media output.
1. Open the Escrow part (12) and
remove the ESS06 media and pollution.
2. Rotate the Escrow Knob in clock-wise
three times.
3. Execute CCIM initialization.
I9509
[Retract]Residual media at the
Escrow entry part (ESS03,
ESS04) when reset the Escrow
mode
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I950A
[Retract]Residual media at the
Escrow (ESS01, ESS02, ESS03,
ESS04) when reset the Escrow
mode
1. Open the Escrow Part(12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.
I950B
[Retract] Residual media at the
Escrow output check sensor
before the Trigger sensor detects
deflecting when winding the
media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
entry (FDS15) and output check
(ESS04) sensor part and the pollution.
3. Execute CCIM initialization.