Error Code List Chapter4. Cash & Check In Module
4-116
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I486D
[Deposit Count/Check]Timeout of
preparing for CST1 store (Escrow-
>CST2)
1. Remove the residual media in the
device.
2. Execute initialization.
I486E
[Deposit Count/Check]Timeout of
preparing for CST2 store (Escrow-
>CST2)
1. Remove the residual media in the
device.
2. Execute initialization.
I486F
[Deposit Count/Check]Timeout of
checking residual media in Bundle
occurs during initialization
1. Remove the residual media in the
device.
2. Execute initialization.
I4870
[Deposit Count/Check] Failed to
rewind while the Escrow is empty
(logical sensor is empty)
1. Remove the residual media at the
Escrow part (12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03) and
the pollution.
3. If no alien material exists, check
whether the sensor is polluted.
4. Execute CCIM initialization.
I4871
[Deposit Count/Check]Deposit
reject command is received when
the residual media are not
detected at the Reject part.
1. Remove the residual media in the
device.
2. Execute initialization.
I4872
[Deposit Count/Check]Media
remaining at the Reject part are
detected.
1. Remove the residual media in the
device.
2. Execute initialization.
I4879
[Deposit Count/Check]Fault
occurs while the BC part is
preparing.
1. Remove the residual media in the
device.
2. Check the BC Cover(3) Lock state.
3. Execute initialization.
I487A
[Deposit Count/Check]BC
response timeout.
1. Check the cable connecting between
Main and BC (Connector CN37).
I487B
[Deposit Count/Check] The
number of notes which have
passed BC is not consistent with
that of Escrow and Reject.
1. Remove the residual media in the
device.
2. Check the BC Cover(3) Lock state.
3. Execute initialization.
I487C
[Deposit Count/Check]BC
operation is not completed.
1. Remove the residual media in the
device.
2. Check the BC Cover(3) Lock state.
3. Execute initialization.
I487D
[Deposit Count/Check]Error of
failure to synchronizing
recognition (subnormal).
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I487E
[Deposit Count/Check]Status on
not operation receiption
command(subnormal).
1.
셔터내
매체
배출
2. Execute Set CCIM Index
3. Execute initialization.
I4880
[Deposit Count/Check]The
maximum number set in the
Escrow is reached (subnormal).
1. Retract the media residual at the
Escrow(12)
2. Execute initialization.
I4881
[Deposit Count/Check]The
maximum number set in the
Reject is reached (subnormal).
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I4882
[Deposit Count/Check]Retract
logical number is full (subnormal).
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.