Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-9
Code
Problem Description
Troubleshooting
512GB00
Encoder Sensor(GS207) for
Feed Motor failed to detect
Light status when Feed Motor
runs in stacking direction
during Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #2 and
open its door.(B)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS207 works fine if
there is nothing jammed.
512GC00
Encoder Sensor(GS207) for
Feed Motor failed to detect
Dark status when Feed Motor
runs in stacking direction
during Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #2 and
open its door.(B)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS207 works fine if
there is nothing jammed.
512J300
Failure to RC2 full check
during Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (B) .
4. Check the stage status after open the
recycle cassette(B)
6.Check contamination status of the
GS112 sensor
512S100
RC2 message timeout error
during operation ready in the
Deposit Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
512S200
RC2 message timeout error
during transation operation in
the Deposit Ready .
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5131100
GS301 sensor jam during
Deposit Ready .
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (C) .
4. Put down the Stage after open the
recycle cassette door (C)
5.Remove notes and substance using
jam removal Knob in the upper side
6. Check whether the sensor is
contaminated or not if there are No
notes or substance
5131200
GS302 sensor jam during
Deposit Ready .
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (C) .
4. Put down the Stage after open the
recycle cassette door (C)
5.Remove notes and substance using
jam removal Knob in the upper side
6. Check whether the sensor is
contaminated or not if there are No
notes or substance