Thank you for choosing Smartpay
Getting Started Guide |
Smartpay PAX S920
(GPRS)
The
S920
is a secure, stylish and mobile payment terminal. It connects to the network via a GPRS/3G data sim card or Wi-Fi.
(You will need to call us to enable setup via Wi-Fi).
Now you’re all ready to take payments
Flip this card over
for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.
Need help?
Integrated EFTPOS?
What’s in the box
*
*If this is a replacement terminal you may need to use the
cables from your existing terminal.
S920 Terminal
base unit
Charging cable
Sim card
(installed)
Return courier
label
Pre-loaded
paper roll
STEP ONE:
Switch on
STEP TWO:
Connect to the Paymark network
Complete these simple steps to get your terminal
connected, ready to take a payment.
Turn on the terminal by holding the button on the terminal.
The terminal will go through a start up sequence.
Charging the terminal
You can charge the terminal by plugging it into the power. On mains power with the charging accessory provided it will take approx.
3 hours for a full charge. You can also use a standard USB car charger with micro USB cable to charge the terminal while you’re on the
go. There is a mains powered charging cradle accessory available depending on your needs. Please Contact our team on
0800 476 278
if you would like to order this.
1. Your terminal arrived with a printed receipt still attached. If
the receipt is short with your business name on it, you are
now all ready to go.
2. If not, you’ll need to call us before you can transact. Call our
technical support team on
0800 476 278
and we will get your
ready to take payments.
If you are integrating your terminal with your Point of Sale (POS) or
Electronic Cash Register (ECR), the idle screen will display the interface
mode (rather than the idle screen as shown on the reverse of this guide).
Please refer to our integration set up guide on our website
smartpay.co.nz/guides
Get help online at:
smartpay.co.nz/help
Call our Technical Helpdesk on
0800 476 278.
To download the full user guide visit
smartpay.co.nz/guides
Contact your bank to enable/disable card types, electronic
offline vouchers (EOV) or contactless.
Contact Paymark to change your business name on your receipt.
