![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870748.webp)
Fav 900
Front axle / Cardan shaft
Removing and fitting the cardan shaft
G
Repair
03.09.2001
3180
000002
G
a
4/6
Capitel
Docu-No.
Index
Date
Version
Page
Removing and fitting the cardan shaft
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Front-axle side
Prop cardan shaft up with trestle.
Remove CV joint (5) and intermediate flange (10).
Note:
Do not offset cardan shaft (1) by more than 15
°
.
PMTAB_Picture
Transmission site
Remove CV joint (5).
PMTAB_Picture
Fitting cardan shaft (1)
Check play in deep-groove ball bearing (106).
If necessary, fit new deep-groove ball bearing
(106).
Note:
Chapter 3180 Reg. C - Technical drawing of
front-wheel drive
PMTAB_Picture
Check cap (2) (with bellows) for damage.