Fav 900
Transmission / Brake system
Installation and removal of rear-wheel brake
G
Repair
09.10.2001
1070
000006
G
a
2/4
Capitel
Docu-No.
Index
Date
Version
Page
Installation and removal of rear-wheel brake
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Preliminary work: Chapter 1015 Reg. G -
Installation and removal of axle drives
Removal
Remove relevant actuating cylinder
(brake cylinder).
Remove shaft (10). Unscrew hexagon screws
from brake plate (9).
PMTAB_Picture
Withdraw brake plate (9) using slide hammer
puller X 899.980.053.
Remove internally and externally toothed discs.
PMTAB_Picture
Remove actuating disc (16) and other internal and
external discs.
Withdraw pins (7).
Disassemble other side in same manner.
PMTAB_Picture
Installation
Note:
Check brake discs for scoring and corrosion.
Oil brake discs before fitting.
Insert discs (washers).
Start with intermediate disc (21), then brake pad
(20), with large bore (arrowed) pointing
downwards (simplifies insertion of shaft (10) at
end, see photo EKI02325).