![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870222.webp)
Fav 900
Transmission / Transmission control unit
Transmission programming
A
General
Fav 900 chassis number 23/3001 and up
20.11.2001
1005
000006
A
a
5/7
Capitel
Docu-No.
Index
Date
Version
Page
Transmission programming
Text-module
Transport (minimum fuel consumption)
Lowest possible fuel consumption, utilising engine torque
Text-module
Text-module
Note:
Since the automatic maximum output control only changes the transmission ratio towards slow,
it is beneficial to switch on cruise control. If the engine speed rises again with cruise control
switched on, the transmission ratio is changed towards fast again, up to the stored speed at a
maximum.
Text-module
4. Reversing and storing the transmission ratio.
Gentle direction change
Pull the joystick backwards (when driving forwards) until the tractor comes to a halt, then press the
activating control and pull the joystick backwards again.
Rapid direction change
The Vario 900 has two means of quickly changing the direction of travel:
Bullet-List
●
Press activating control and move joystick to left
●
Operate switch (B) in steering wheel adjustment lever.
PM-Picturemodule
Text-module
If the driver moves the joystick to the left while driving and then presses the activating control or the
switch in the steering wheel adjustment lever ( B ), a programmed direction-change procedure is
initiated. The tractor decelerates to a standstill, then accelerates away in the opposite direction.
During deceleration, the preset direction of travel is indicated by the relevant display flashing, while the
actual direction of travel is shown by a steady light.
Engine speed
(accelerator)
1850 rpm
Automatic maximum output control setting:
16%
Reduction in engine speed to
1400 rpm
PMTAB_Picture