![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870365.webp)
Farmer 400
Fav 700
Fav 900
Transmission / clutch actuation system
Setting clutch master cylinder
E
Testing
24.1.2001
1100
000001
E
a
3/3
Capitel
Docu-No.
Index
Date
Version
Page
Setting clutch master cylinder
Fault: Tractor clutch will not disengage.
Bullet-List
Possible cause:
●
Check settings on master clutch cylinder .
Text-module
Preliminary work:
Release steering column cover.
Text-module
Setting clutch pedal travel
Clutch pedal engaged
Distance from pivot point of clutch pedal to foot plate of clutch pedal 219 +/-2mm
In event of deviations coat thread of stop screw A with synthetic bonding agent X 903.050.084.
Set distance of 219 +/-2mm and lock with lock nut. Check that snubber is on stop screw A.
Clutch pedal disengaged
Distance from pivot point of clutch pedal to foot plate of clutch pedal 50 -2 mm
In event of deviations, set distance of 50 -2 mm with stop screw B and lock.
Note:
Clutch pedal travel approx. 169 mm
Note:
Clutch pedal travel only has to be measured in exceptional cases, e.g. after replacing clutch
pedal.
Text-module
Setting clutch master cylinder
Clutch pedal engaged
Set piston rod play of clutch master cylinder. Lightly oil bellows on piston rod collar.
Loosen hexagon nut (26) and screw piston rod (27) in.
Piston rod (27) now has ample play.
Unscrew piston rod (27) until there is no play.
Then screw piston rod (27) in by one-sixth of a turn and lock in this position with hexagon nut (26).
Piston rod (27) now has slight play (approx. 0.1 mm) .