![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870219.webp)
Fav 900
Transmission / Transmission control unit
Transmission programming
A
General
Fav 900 chassis number 23/3001 and up
20.11.2001
1005
000006
A
a
2/7
Capitel
Docu-No.
Index
Date
Version
Page
Transmission programming
PM-Picturemodule
Text-module
When driving with cruise control engaged, the stored speed can be adapted to the current operating
conditions by adjusting the relevant rotary control P2 or P3 .
Text-module
2. Activating cruise control.
PM-Picturemodule
PM-Picturemodule
Text-module
The cruise control can only be activated if the following conditions are met:
Bullet-List
●
Clutch pedal is not operated
●
Vehicle is in motion
●
Engine speed is greater than 1400 rpm
PMTAB_Picture
Presetting speeds using the rotary controls on
the control console
Once the transmission menu has been called up,
the desired speed can be set using the rotary
controls.
P2 = cruise control 1 ( A )
P3 = cruise control 2 ( B )
The set values are automatically stored and
remain stored even when the ignition is switched
off.
PMTAB_Picture
Press the key ( A or B ) briefly to toggle between
the two cruise control memories.
PMTAB_Picture
If you wish to drive at the stored speed again,
press the joystick to the right ( "Cruise control
on" ).
The transmission accelerates or decelerates until
the stored speed is reached.
The cruise control pictogram ( A ) lights up on the
instrument panel, and the stored speed is
displayed on the multi-display ( B ).