![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870197.webp)
Farmer 400
Fav 700
Fav 900
Tractor / General system
Calibration code 4007
F
Setting and Calibration
12/1999
0000
000008
F
a
1/5
Capitel
Docu-No.
Index
Date
Version
Page
Calibration code 4007
Text-module
10. Calibrating the transmission ratio characteristics
Text-module
Bullet-List
Caution: following preparatory steps must be carried out.
●
Handbrake released
●
Start engine
●
Tractor stationary (less than 0.01 km/h)
●
Engine speed 1600 rpm ± 30
●
Engine speed must not fall below 1400 rpm during calibration
●
No error message from speed sensors
●
Neutral switch not set to neutral - transmission is in non-positive lock (both F/R lamps light up,
though this does not apply to new transmission e-box at initial calibration)
●
Range control set to neutral (range control is normally neutral after calibration). If necessary, shift to
neutral manually via emergency control system.
●
Clutch pedal not actuated
●
If necessary, actuate footbrake.
●
If error messages are displayed, faults must be individually cleared
Text-module
First press key and hold,
then press key, and fault symbol is cleared. Clear other faults in same way.
Pictogram at left displayed.
Press key and hold,
then press key, and fault symbol is cleared
Pictogram at left displayed.
Press key and hold,
then press key, and fault symbol is cleared
Press key, next pictogram displayed