www.Komatsu.com
Printed in Japan 200801 IP.AD (10)
CEN00075-02
Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
HORSEPOWER
Gross: 671 kW
899 HP @ 2000 rpm
Net: 664 kW
890 HP @ 2000 rpm
OPERATING WEIGHT
108390 kg
238,960 lb
D475A
-5E0
Photo may include optional equipment.
●
Air conditioner with heater and defroster
●
Air-suspension seat
●
Alternator, 100 A/24 V
●
Auto-priming system
●
Back-up alarm
●
Batteries, 200 Ah/4 x 12 V
●
Blower fan
●
Decelerator pedal
●
Dry-type air cleaner with dust evacuator
and dust indicator
●
Eight-roller track frames
●
Final drive case wear guard
●
Hinged underguard with front pull hook
●
Hydraulic track adjusters
●
Lighting system (including four front
and two rear lights)
●
Lockup torque converter
●
Mirror
●
Mirror, rearview
●
Muffler with rain cap
●
Perforated front mask
●
Radiator reserve tank
●
ROPS brackets
●
Seat belt
●
Segmented sprockets
●
Shoes,
710 mm
28" extreme service,
single-grouser
●
Starting motors, 2 x 7.5 kW/24 V
●
Steel cab
●
Steering control
●
Sun visor
●
TORQFLOW transmission
●
Track roller guards
●
VHMS (without orbcomm)
●
Warning horn
●
Water separator
●
Wet steering clutches
STANDARD EQUIPMENT
●
Additional cab heater
●
Battery isolator
●
Coal dozer
●
Counterweight
●
Double wiper
●
Dual tilt dozer
●
Fast fuel fill
●
Fire extinguisher
ROPS*:
Weight . . . . . . . . . . . . . . . .
940 kg
2,070 lb
Dimension:
Width . . . . . . . . . . . . . . . . . .
1940 mm
6'4"
*Meets ISO 3471, SAE J1040 APR88, ROPS
standards.
Multi-shank ripper:
Hydraulically controlled parallelogram ripper
with three shanks. Ripping angle variable
and depth adjustable in two stages.
Weight (including hydraulic
control unit) . . . . . . . .
9720 kg
21,430 lb
Beam length . . . . . . . . . . . .
3085 mm
10'1"
Maximum lift above ground .
1196 mm
3'11"
Maximum digging depth . . . .
1124 mm
3'8"
Steel cab**:
Weight . . . . . . . . . . . . . . . .
455 kg
1,000 lb
Dimension:
Length. . . . . . . . . . . . . . .
1790 mm
5'10"
Width . . . . . . . . . . . . . . . .
1455 mm
4'9"
Height from compartment
floor to ceiling . . . . . . . .
1530 mm
5'0"
**Meets ISO 3449 FOPS standard.
Variable giant ripper:
Variable, parallelogram single-shank ripper
ideal for ripping up tough material. Ripping
angle is variable. Ripping depth is adjustable
in four stages by a hydraulically controlled
pin puller.
Weight (including hydraulic
control unit) . . . . . . . .
7360 kg
16,230 lb
Beam length . . . . . . . . . . . .
1477 mm
4'10"
Maximum lift above ground .
1196 mm
3'11"
Maximum digging depth . . . .
1744 mm
5'9"
●
Hydraulics for ripper
●
Lattice front mask
●
Light for ripper
●
Orbcomm
●
Prelubrication
●
Push plate
●
Radio-AM/FM cassette
●
Safety glass
●
Shoes:
—
810 mm
32"
—
910 mm
36"
●
Spill guards
●
Strengthened Semi-U blade
●
Strengthened U blade
●
Track shoe slip control system
OPTIONAL EQUIPMENT
C
RA
WLER
D
OZER
