Category : Product Improvement
Group : Brakes
Bulletin No : M/22/F17/09
Model : MKM 595/585 DI OIB
Date : 05/05/2016
Sub : Introduction of Pull type design in Oil Immersed Brakes (OIB).
Reason for Change : Design Optimization.
Modification :
1. Design of brake assy is changed from shaft type to pull type. Accordingly Brake actuating disc ramp
angle is changed from 21 degree to 18 degree.
2. Also Intermediate Discs (Steel) are changed from 3 nos. to 2 nos.
Existing Design
New Design
Shaft
Type
Auto
Swing
Arrestor
Manual
Swing
Arrestor
Pull
Type
