![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870243.webp)
Fav 900
Transmission / Axle drives
Installation and remove of axle drives
G
Repair
13.09.2001
1015
000002
G
a
1/2
Capitel
Docu-No.
Index
Date
Version
Page
Installation and remove of axle drives
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Axle drives (rear axle)
Removal
Remove relevant rear wheel.
Drain oil from axle drive.
Remove any obstructing panels.
Remove lateral stabilisation rod from three-point
linkage or complete lateral stabilisation unit.
Prop cab, taking appropriate safety precautions
Remove axle housing/cab support.
PMTAB_Picture
Remove any other obstructing components.
Prop rear-axle housing, taking appropriate safety
precautions. Attach axle housing (15) to hoist
(e.g. small jib crane), taking appropriate safety
precautions and raise.
PMTAB_Picture
Fitting
Clean flange surface and coat with surface
sealant X 903.050.074.
Attach axle housing (15) in hoist, taking
appropriate safety precautions, and flange-mount
on rear-axle housing.
PMTAB_Picture
Tighten hexagon nuts (21) and bolts (18)
crosswise in stages to 120 Nm .