Fav 900
Engine / Short block
Removing and refitting camshaft
G
Repair
Fav 900 chassis number 23/3001and up
20.2.2001
2210
000007
G
a
2/2
Capitel
Docu-No.
Index
Date
Version
Page
Removing and refitting camshaft
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Using a mandrel and in new bushes towards fan
until flush with the crankcase.
Note:
Bearing bushes must be machined to the
required size. The crankcase must be cleaned
with compressed air (oil channels) after this
operation.
PMTAB_Picture
Refitting the camshaft
Slide guide mandrel into crankcase, insert
camshaft in mandrel and refit camshaft into the
crankcase.
PMTAB_Picture
Refit axial stop, insert screws and tighten at
specified torque.
Measure end clearance; if necessary replace
thrust water.
PMTAB_Picture
●
Refit timing gear.
●
Refit timing case.
●
Refit oil pan and idler gear.
●
Reconnect pushrod and refit rocker arm
assembly.
