![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870945.webp)
Farmer 400
Fav 700
Fav 900
Electrics / system in general
A005 - ECU, lift assembly
E
Testing
900 > 23/3001
28.11.2000
9000
000046
E
b
5/5
Capitel
Docu-No.
Index
Date
Version
Page
A005 - ECU, lift assembly
Applicability:
previous versions of Fav 700 - twin e-box with end numbers 051 to 054 are interchangeable with
current latest versions.
Bullet-List
Explanation and comparison with EPC-C box:
●
(fitted to Fav 500; Xylon; Fav 800 and Fav 900 up to 23/3000)
Text-module
Bullet-List
New
●
Terminal setting options for rear power lift mean that several pin assignments are no longer
applicable, though this has to be programmed via K-bus (see pins 14,33).
●
Only "actual" signal cables are shown in relevant electrical circuit diagrams (EPC control system).
Bus messages to terminal, e-box A002, instrument panel A007 and terminal A008 cannot be seen
in circuit diagram (see "CAN enhanced controls bus circuit diagram").
Bullet-List
Unchanged
●
Setpoint / depth settings in control console A004 as voltage potentiometer
●
Connection to K-bus and CAN1
●
Electrical values of power lift components
Bullet-List
Testing and diagnostics:
●
Generally applicable circuit diagram: "Electrohydraulic power lift control"
●
Other circuit diagrams required: "Power supply", "Earthing system", "Implement socket",
"Electronics power supply", "Enhanced controls bus", and "Instrument panel"
●
Following test equipment is required to carry out electrical measurements directly on EPC box:
68-pin adapter box X 899.980.208.100 and 68-pin/55-pin intermediate adapter cable X
899.980.208.208
●
"EPC rear" menu should be used in FENDIAS.
●
Please refer to Electrical Block Diagram for terminal diagram for pulse counting with on-board
computer using external switch....................................
Text-module
Note:
Chapter 8610 Index B - Rear power lift troubleshooting plan
Chapter 9000 Index C - Electrical circuit diagrams