![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870455.webp)
Fav 900
Transmission / Live PTO
Installation and removal of live PTO gearbox
G
Repair
28.08.2001
1220
000003
G
a
10/17
Capitel
Docu-No.
Index
Date
Version
Page
Installation and removal of live PTO gearbox
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Hold pre-assembled shaft (35) in place in housing
cover (316).
Where removed: insert existing adjusting washers
(124) and press bearing outer race of taper roller
bearing (123) in as far as stop.
PMTAB_Picture
Insert pre-assembled pair of gears and spur gear
(25).
PMTAB_Picture
Pre-assembling strap (201):
Coat thread of hexagon screws (205) with
synthetic bonding agent X903.050.084.
Fit spacer sleeves (207) and supports (214).
Tighten hexagon nuts (206).
PMTAB_Picture
Fit sliders (105) into clutch hub (104).
Coat thread of stud bolts (203) with synthetic
bonding agent X903.903.050.084.
Set straps (201) equidistantly such that they are
play-free.
Then loosen each stud bolt (203) by 1/6 turn and
lock in this position.