![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870358.webp)
Fav 900
Transmission / Vario transmission unit
Fitting continuously variable transmission
G
Repair
Fav 900 chassis number 23/3001 and up
16.05.2001
1080
000007
G
a
6/9
Capitel
Docu-No.
Index
Date
Version
Page
Fitting continuously variable transmission
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Connect cable couplers, clutch-bleed line and
hydraulic line.
X315 = Y002 speed range I solenoid valve
X316 = Y003 speed range II solenoid valve
X317 = Y004 turboclutch valve solenoid valve
X318 = Y005 speed governor solenoid valve
X157 = B008 high pressure sensor
PMTAB_Picture
Screw two M8 stud bolts into transmission
housing. Fit new gasket.
Fit new O-rings in valve unit with a little grease.
Insert valve unit, tighten fastening screws to
25 Nm from inside to outside.
Connect cable coupler and hydraulic lines.
PMTAB_Picture
Fit new O-rings with a little grease and tighten
pressure filter to 25 Nm.
Connect cable coupler.
PMTAB_Picture
If required, coat new shaft seal on outside with
1:1 spirit/water mixture and press in as far as stop.
Fill sealing lips 2/3 with grease.
Insert actuator shaft.